Shanghai Xianzhong Electronic Technology Co., Ltd. Company Logo Shanghai Xianzhong Electronic Technology Co., Ltd.
5 1

Automatic Plastering Machine for Sale

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price

Contact us

Shanghai Xianzhong Electronic Technology Co., Ltd.
[China]

Address
Room 1001, first Building, No.28, 200 Lane, Longcao Road, Xuhui District Shanghai Shanghai
Phone
86-021-18613158270
Contact name
Lucy Yang

Quick Information

  • Place of Origin: China
  • Model Number : TUOP-4

Description

TUPO-4 [Automatic Plastering Machine ]
New Aluminum Ally main unit and stainless steel direction pipes. Original
gear rack driving system enable output of main power is more peaceful and stable. Less failure.
 
Production Description:
Item: [Automatic Plastering Machine ]
Model No.:
TUPO-4
Rendering Thickness: 3-30mm
Rendering Speed: 400m2/day
Rendering Height: 3.5m

Dimension (L*W*H):800*600*550MM
Weight: 110kg
Electricity Phase: Three/Single Phase
Voltage: 380v/220v

Power: 0.75kw
 

[Automatic Plastering Machine ] Feature:
 
1. Material of [Automatic Plastering Machine ]   body: Stainless Steel or iron.
2. Easy to operate the machine in short time, our machine has been improved to solve the problem of it's difficult for freshman to master the machine. Only 1 minute to be ready. And the errors of thickness will less than 1mm.
3. Its practical due to one person can finish the work which can help you save labors and wages.
4. Thickness can be adjusted freely and this machine can reach the very top of roof.
5. Full automatic wall rendering machine
6. Obtained the CE Certificate
7. Easy to move with the omni-directional wheel
8. Simple cleaning and keeping method 
9. The safest production design
10. One year warranty and lifetime technical guidance
 

FAQ
I. What is [Automatic Plastering Machine ]?
RENDERING MACHINE is also called [Automatic Plastering Machine ] Automatic Plastering Machine, Wall Rendering Machine, Wall Plastering Machine Etc. It is unique and perhaps one kind of automated rendering machinery ideally suitable for the construction/building industry. It works with conventional cement mortar which brings it to a smooth, flat finish with variable and adjustable thickness to suit each application.

II. What finish can be achieved?
Depending on how fine or course the sand is, our [Automatic Plastering Machine ] can produce smooth and flat render finish.
 
III. How much thickness should be applied?
The same principles apply as the way you render by hand. However, if required,
[Automatic Plastering Machine ] enables to achieve from 3mm up to 30mm render.

IV. What is the render height?
It can reach up to 3.5 meters.

V. How is the render quality?
There are two vibrators on the rendering trowel, which gives you a high quality render,
[Automatic Plastering Machine ] enables you to get finish render as follows:
Vertical: the different between top and bottom is within 2 mm.
Horizontal: the difference from side to side is within 2mm.

VI. Dose machine need a special mix or compound?
No, the mortar recommended for AUTOMATIC RENDERING MACHINE is the same mortar that you use when rendering by hand. It can work with the traditional cement mortar, however lime or gypsum or other additives can be added into the mixture if needed.

VII. How is[Automatic Plastering Machine ]used?
Operating our [Automatic Plastering Machine ] is as easy as step 1-6:
Step1.fix the machine
Step2. Load ash
Step3. Go up to the first plastering
Step4. Go down for the first smoothing
Step5. The first section of plastering wall is finished
Step6. Repeat step1-5.
 

VIII. Is it difficult to operate [Automatic Plastering Machine ]?
No. It's very easy to operate AUTOMATIC RENDERING MACHINE and it doesn't require advanced technical training. Half a day's training is enough for a person to operate machine themselves.
 

Problems Meet and Solutions:

I. Press start button, there is no respond from machine
1.Check if the two livers have been pulled up.
2. Check if the stop switch on the left side of machine works by pressing the switch
3.Check the power supply

II. Press start button, machine goes up but the conveyer is not rolling.
1. Switch on the conveyer switch.
2. Check the chain on right side of machine, if the chain is rolling, that means the conveyer is loosen. In this case, we have to tight the conveyer by adjusting the screws on both side of machine closer to the plastering trowel.

III. Machine reach to ceiling but no stop automatically 
Cut off power supply by turning off main switch, nest turn on main switch to connect
power supply, and then machine comes down automatically.


Good quality with reasonable price for you.
Hope to establish good business with you in nearly future!!
Have a nice day!!
Lucy Yang


Packaging & Delivery

  • Packing :1 unit per wooden case
  • Delivery Lead Time : 7 days for ready goods
  • Minimum Order : 1 unit
  • Supply Ability : 1000 units per Month

Product Image

  • Automatic Plastering Machine for Sale image

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To Lucy Yang
Shanghai Xianzhong Electronic Technology Co., Ltd.
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Other Construction Machinery
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.